Tile Installation in Durham, NC
Vilchis Hardwood Floors has been installing tile across Durham and the Triangle for more than 16 years. We handle floor tile, kitchen backsplashes, bathroom and shower tile, and full tile replacement, the kind of work where a sixteenth of an inch off on your layout shows up in every grout line for the next 20 years. That’s why we measure twice, dry-lay the field before a single tile gets thinset, and prep the subfloor properly so nothing cracks or lippages a year down the road.
If you’re searching for tile installers near me in Durham, here’s what you get with us: a real crew that does this every day, an honest estimate with no surprise add-ons, and clean lines on ceramic, porcelain, or natural stone. We serve Durham, Cary, Carrboro, Chapel Hill, Raleigh, and Wake Forest.
Our Tile Installation Services in Durham
We take on residential tile work of just about every kind. Here’s what we install most:
- Floor tile installation — porcelain, ceramic, and natural stone for kitchens, entryways, bathrooms, and whole-home floors. Proper subfloor prep and crack-isolation membrane where it’s needed.
- Tile backsplash installation — kitchen and bar backsplashes in subway, mosaic, herringbone, and custom patterns. We handle the outlets, end caps, and tricky corners cleanly.
- Bathroom and shower tile — waterproofed shower walls, niches, curbless pans, and tiled tub surrounds built to actually keep water where it belongs.
- Wall and accent tile — fireplace surrounds, feature walls, and accent strips.
- Custom tile designs — patterned floors, borders, inlays, and layouts for clients who want something specific. If you’ve got a Pinterest board, bring it.
- Tile replacement and repair — cracked tiles, failing grout, loose floors, and old surfaces pulled out and redone right.
Why Tile Works So Well in Triangle Homes
Durham summers are humid, and a lot of homes around here have kitchens and baths that take a beating. Tile holds up to all of it. It shrugs off water, so it’s the obvious pick for bathrooms, laundry rooms, and backsplashes. It handles heavy foot traffic without wearing down. It wipes clean with a mop, no refinishing every few years like wood. And there’s no real ceiling on the look, you can go calm and neutral or run a bold patterned floor that becomes the whole room.
The catch is that tile is only as good as the install. A beautiful tile over a bad subfloor still cracks. That’s the part we obsess over.
How Our Tile Installation Process Works
- Consultation and measure. We come out, look at the space, talk through materials and layout, and give you a written estimate. No pressure.
- Subfloor and surface prep. We level floors, check for deflection, and add cement board or an uncoupling membrane where the job calls for it. This is the step most cracked-tile problems trace back to.
- Dry layout. We lay out the field before setting anything, so cuts land in the right spots and the pattern is centered the way it should be.
- Setting the tile. Tiles go down with the right trowel and thinset for the material, back-buttered where needed, spaced for consistent grout lines.
- Grout, seal, and finish. We grout, clean the haze, and seal natural stone or grout lines that need it.
- Final walkthrough. We walk the finished job with you and don’t call it done until you’re happy with it.
Tile Contractors Serving Durham and the Triangle
We’re based at 237 Obie Dr in Durham, NC 27713, and most of our tile work is within about a 30-minute drive. If you’re looking for tile installation contractors in Durham, Cary, Carrboro, Chapel Hill, Raleigh, or Wake Forest, you’re in our area. Not sure if we cover your spot? Call and ask, we’ll tell you straight.
Get a Free Tile Installation Estimate
Whether it’s a single backsplash, a master bath, or every floor in the house, we’ll give you an honest quote and a realistic timeline. Call (919) 794-1116 or request a free estimate online, and let’s talk about your tile project.
Tile Installation FAQs
How much does tile installation cost in Durham, NC?
Most tile installs in the Durham area run based on square footage, tile type, and how much prep the space needs. Floor tile, shower tile, and backsplashes all price differently because the labor differs. The honest answer is that we’d rather measure your space and give you a real number than throw out a range that may not fit your job. Estimates are free.
How long does a tile installation take?
A kitchen backsplash is often a day or two. A bathroom floor might be a few days once you factor in prep, setting, grout, and cure time. Larger floors or full shower builds take longer. We give you a timeline with your estimate so you’re not guessing.
Can you replace just a few cracked tiles, or do I need a whole new floor?
Often we can replace individual cracked or loose tiles and match them. Whether that’s the right call depends on why they cracked in the first place. If the subfloor is the problem, patching tiles is a temporary fix. We’ll tell you which situation you’re in.
Do you install backsplashes only, without a bigger project?
Yes. Backsplash-only jobs are some of our most common work. If you just want a new kitchen or bar backsplash installed, we do that.
What kinds of tile do you work with?
Ceramic, porcelain, and natural stone, in floor tile, wall tile, mosaics, and large-format. If you’ve already picked a tile, bring the specs. If you haven’t, we’ll help you choose something that fits the space and your budget.
Do you serve areas outside Durham?
Yes. We regularly work in Cary, Carrboro, Chapel Hill, Raleigh, and Wake Forest. Call us at (919) 794-1116 to confirm we cover your location.
Vilchis Hardwood Floors
237 Obie Dr, Durham, NC 27713
(919) 794-1116
Get Directions
contact
Request a
Consultation
We’ll visit your property and sit down with you to discuss what you’re looking for. During this no-pressure consultation, we’ll learn about your project, identify your style preferences, and map out a plan that aligns with your budget.
Request a Free Quote
